Product Description

PS2714
·No standy power requirement
·Case design allows screw down or adhesive mounting.
·Choice of normally open,normally closed or change over contacts
·Customer defined sensitivity ,choice of cable length and connector

Sensor Body Material / A.B.S
Filling / Epoxy
Max Contact Rating / 10W
Max Switching Voltage / 100 VDC
Max Switching Current / 0.5A
Min Breakdown Voltage / 220 VDC
Max Carry Current / 1.0A
Max Contact Resistance / 100 mΩ
Min Insulation Resistance / 108 Ω
Release Time / 0.1 ms Max
Operate Time / 0.4 ms Max

Product Image